OVERLAND/PSS 772 ER,LR/LRF Merges

Jeremiah Lajide
colourriot@hotmail.com

Instal
------
You need to add the pss_vars xml guage (from the pss04 folder) to the all the panel folders

Create the appropriate folders for each aircraft models and copy the files to their respective folders. folders should be as follows:
77ERGE, 77ERRR, 77ERPW, 77LR105B, 77LR110B1, and 77LRF

Engine start up:

at the point of actual engine start up, FIRST set the fuel cut off valves in the 2d pedestal to on
Start the engine in the 2d overhead panel
Using the vc, at 21%N2 run the fuel cutoff valve

After both engines are on and running, click on the engine auto start in the vc. The clock should switch on at the moment.

If these steps are not followed, your landing gear and lights would not work!


=============================================================================

Aircraft details

77E
Take off weight: 656000
fuel: 45220usg

RR trent895    95000lb thrust rating
GE90-9413      93700lb    "     "
PW4090         90000lb    "     "
-------------------------------------
77LR

Take off weight: 766000
fuel: see lr folder

GE90-105B       115300lb thrust rating
GE90-110B1      110100lb    "     "
-------------------------------------
77LRF

Take off weight: 766000
fuel: see 47890usg

GE90-110B1       110100lb thrust rating

cargo: 27 pallets on top          *see Pss manual
       10 pallets on bottom

=============================================================================
Merge details:

VC merge
I could not completely merge the vc. the gauges for the vc are just indicator guages i made for us vc pilots to be able to take off, land and  spend most of the flying time in the vc.
to remove the ils signals after landing, move the